• Expert cleaning, restoration and sealing of all tile, grout and natural stone surfaces.

• Patented cleaning equipment that will not damage your home or environment.

• Expert grout sealing that the installers don’t tell you about.

How can I tell if my stone has already been sealed?

Apply a drop of water at least ½-inch in diameter to the top and the stone and let stand for at least 15 minutes. Cover with a glass to inhibit evaporation. If the stone did not darken then your stone is probably sealed against water-based stains. Testing for oil repellency is not as simple because if your stone is not sealed, you will have an oil stain.

What is a sealer?

A sealer is like a coat of armor for your stone, tile or grout. Our sealer will decrease the opportunity that anything can stain or harm your surface. We believe that you should always use an impregnation sealer allowing you to retain the natural beauty of the surface.

HOW IT WORKS

Pre-Treatment

We first apply a mild cleaning solution to a section of the floor and allow it to work for ten minutes.  This is a gentle solution that will not cause damage to your tile like some harsh acids.  This pre-treatment emulsifies grease, accumulated soil, and contaminants, allowing the rest of the cleaning process to be very effective, and also leaving the floor and grout odor free.

Pressure Washing

Our hard-surfacing cleaning system is specifically designed for cleaning tile & grout, acrylic, and epoxy surfaces.  Our cleaning system is designed with four components that work in harmony; chemical action, high pressure, heat, and vacuum that allow the user to “surgically” remove the soil embedded into porous parts of the tile and grout.

The system generates water pressure of 50 to 3,000 P.S.I. and water temperature up to 240 degrees to dissolve and remove years of soil and contaminants restoring your floors almost to its original condition making a huge impact on the cleanliness of the environment. 

The vacuum hose also suctions the water along with the dirt to a containment tank on our truck, and the grey water is disposed of in accordance with EPA regulations.  Our cleaning system restores tile & grout 85 to 90 percent of its original appearance.  Some stains, (red wine, mustard, dyes, etc.) will not come out because they literally dye the grout, but most stains are safely removed by the cleaning system.

In a nut shell, the system and tool will pressure wash, clean rinse, extract, and dry all in one process, making this the most effective and efficient cleaning method available today.

Sealing

After cleaning and drying, we use a sealer on the floor, which soaks into the porous parts of the tile and grout and guards against future staining.  The sealer does not change the appearance of the floors by adding shine, but preserves the natural beauty of the surfaces.

Maintenance